Phaser 4400 Laser Printer Service Manual 4-7Resetting NVRAMResetting NVRAM returns all the Image Processor Board NVRAM-storedparameters to their factory default values. You can reset the PostScript NVRAMusing the Customer Menu, the Service Diagnostics Menu, or the Front Panel Shortcut.Customer Menu ResetsResetting job defaultsResetting the job defaults resets the paper source, print-quality mode, 2-sidedprinting, and image smoothing to their default values.1. From the Main Menu, highlight Print Setup Menu and press OK.2. Highlight Job Defaults Menu and press OK.3. Scroll to Reset Job Defaults and press OK.4. Select Reset Job Defaults NOW and press OK to reset the job defaults.Resetting Printer setup values to defaultResetting the Printer setup values resets the job defaults, front panel language,Intelligent ready, MPT Tray setup, Tray 1 -3 setup, startup page, front panel intensity,front panel contrast, PostScript error information and energy star to their defaultvalues.1. From the Main Menu, select Printer Setup Menu and press OK.2. Select Reset Printer Setup Menu and press OK.3. Select Reset Printer Setup NOW and press OK.Resetting Connection Setup Values to DefaultResetting the connection setup values resets the TCP/IP address, TCP/IP addressmenu settings (gateway, broadcast, etc.), CentreWare IS, EtherTalk, NetWare, set IPXframe type, IPP and Ethernet speed to their default values.1. From the Main Menu, select Connection Setup Menu and press OK.2. Select Reset Connection Setup and press OK.3. Select Reset Connection Setup NOW and press OK.Caution Make note of the current network settings or print aconfiguration page to preserve the customers currentnetwork settings prior to resetting the network setup tofactory default values.
