120 • Main Menu XEROX WIDE FORMAT COPY SYSTEMNOTE: The valid range for passwords is 0 - 65535. If the existingpassword or an invalid password is entered, an error message will bedisplayed. The new password must be entered again.8. Press the Enter key to confirm the new password. TheCHANGE PASSWORD screen will instruct you to re-enter thenew password.CHANGE PASSWORDRE-ENTER NEW PASSWORD:Change Password – Re-Enter Password Screen9. Use the numeric keypad to re-enter the new password. Thepassword will display as asterisks.10. Press the Enter key to confirm the re-entry. You will be returnedto the SYSTEM ADMINISTRATION menu screen. The newpassword is now effective. The old password is no longer valid.Scan-to-FTP: Scanned images can be transferred to 4 remote FTPdestinations. The scanned images are not stored on the Controller’s harddrive. The FTP feature is located on the Sample Mode screen.Scan-to-Net: At most installations, users have the ability to recall thelast image scanned (that was not sent to an FTP destination) and all thesettings associated with that image. The recalled image can then beprinted without the need to scan from the original document.Security concerns at certain installations, however, might require that theimage recall feature be disabled. The SECURITY SETTINGS option ofthe System Administration menu allows the system administrator toenable or disable the image recall feature. The default setting isENABLED.To enable/disable the image recall feature:1. Select the Menu key.2. Access the SYSTEM ADMINISTRATION menu.3. Press the Next key until SECURITY SETTINGS is highlighted.4. Press the Enter key to select SECURITY SETTINGS. TheSECURITY SETTINGS screen is displayed.SECURITY SETTINGS
