62 • Special features keys XEROX WIDE FORMAT COPY SYSTEMStop Start1Transform SamplePrinterInterruptStore/RecallBatchSets BuildFinisherA B C4 5 67 8 930 C/CA/.2D E FG H I J K L M N OP R S T U V W X YNumeric Keys AreaPrinter Interrupt keyJobs on the WIDE FORMAT COPY SYSTEM have the following priority:1. Any job currently printing2. A copy job that is ready to print3. A remote print job.If a remote print job is in progress, a copy job (one or more imagescaptured by the Scan System), cannot normally use the Printer until theremote print job has finished. The Printer Interrupt key enables you toswitch the copy priority from normal to high.To process a copy job immediately, press the Printer Interrupt key. ThePrinter Interrupt indicator lamp illuminates. The current pages of themost current remote print job are completed. Usually a maximum of twopages are printed. The print job is then suspended and you can run copyjobs. When the copy jobs are finished, you can press the PrinterInterrupt key again. The Printer Interrupt indicator lamp isextinguished. The interrupted remote print job resumes.If you send no more copy jobs, press no keys, and scan no documents,the Printer Interrupt feature is automatically disabled after a time set bythe PRINTER INTERRUPT timer. Refer to "Timers" in the "Main Menu,CONFIGURATION" section for instructions about how to set this value.The default value is 1 minute. It can be set to a value between 1 and 99minutes.
