XEROX WIDE FORMAT COPY SYSTEM Special features keys • 61Special features keysSpecial features keysThere are many enhanced features for making copies that meet specialneeds. The keys that control these features are on the right side of theScan System Control Panel.To enable a feature, press the applicable key. If the feature has anassociated screen, that screen is displayed when the key is pressed. Ifany settings are changed from the default state, the correspondingindicator lamp next to the key illuminates. Pressing the C/CA key on thenumeric keypad twice returns all settings for the feature to the defaultstate and the corresponding indicator lamp is extinguished.When the settings for a feature are appropriately set, pressing the samefeature key causes the changes to be accepted and the system returnsto the READY state. Pressing a different feature key while editing asetting is invalid and causes a beep. Pressing a different feature keywhile not editing a setting causes the requested feature screen to bedisplayed.If a feature has no associated screen, pressing that feature key switchesthe feature on (enabled) or off (disabled). When such a feature isenabled, the corresponding indicator lamp is illuminated.If the BEEP function (factory default) is enabled, a beep sound will beheard when a key is pressed. If an improper key is pressed, a multiplebeep sound will be heard.The illustration on the following page depicts the special features portionof the Scan System Control Panel.
