70 • Special features keys XEROX WIDE FORMAT COPY SYSTEMThe factory default job settings are permanently stored in memory. TheRECALL FACTORY DEFAULTS option of the STORE/RECALL menuenables you to recall the factory default settings as the active defaultsettings.To recall the factory default settings:1. Press the Store/Recall key. The STORE/RECALL menu screenis displayed.2. Press the Next key until RECALL FACTORY DEFAULTS ishighlighted.3. Press the Enter key to select RECALL FACTORY DEFAULTS.The factory default settings are immediately recalled. Aconfirmation screen is displayed.JOB PARAMETERS RECALLEDPRESS ENTER TO CONTINUEJob Parameters Recalled Screen4. Press the Enter key to return to the READY screen.Finisher keyA finishing device, such as a folder, can be connected to the WIDEFORMAT COPY SYSTEM. If such a device is connected, the Finisherkey enables or disables that device.To enable/disable a finishing device:• Press the Finisher key. The Finisher indicator lamp illuminatesand the FINISHER menu screen is displayed. The black arrowsindicate that the menu contains more options than are visible.The selected option is highlighted.FINISHERFOLD PROGRAMTITLE BLOCK LOCATIONOUTPUT BINOVERLENGTH OPTIONTAB OPTIONSFinisher ScreenOther Finisher options that are accessed from this screen, using theNext key, are: Punch Options, Margin Options, Crossfold Options, andIntelligent Title Block Option.NOTE: If no finishing device is connected, pressing the Finisher keyproduces the error message shown below.Recall FactoryDefaults
