XEROX WIDE FORMAT COPY SYSTEM Special features keys • 75DON’T CARE is the factory default setting. The settings are dependenton the finisher.OUTPUT BINOUTPUT BIN: BYPASSOutput Bin ScreenSets Build keyThe Sets Build mode allows you to scan a series of images and build anelectronically collated set. Once the set is built, one or more collatedcopies can be printed.NOTE: The Sets Build mode is not available unless the WIDE FORMATCOPY SYSTEM is in the COPY mode.NOTE: Any of the finishing options can be changed during a Sets Buildjob. The option(s) must be changed before the document to be copied isinserted.In Sets Build mode, documents of C (A2) size, and larger, are normallydelivered to the rear of the Scan System after the scan. If theDOCUMENT RETURN parameter is set to REAR, then all documentsare delivered to the rear after scanning. The WIDE FORMAT SCANSYSTEM is equipped with a document catching device, called theStacker, to receive these documents. Refer to “Scan System Control” inthe “Main Menu” section of this manual for further information about theDOCUMENT RETURN parameter.To build a collated set:1. Press the Sets Build key. The Sets Build indicator lampilluminates and the SETS BUILD screen is displayed. Thisscreen enables you to select the desired collation method, toselect whether or not to print checkplots, and to begin theaccumulation of the documents to create the set.SETS BUILDCOLLATION: FORWARD9 CHECKPLOTSets Build Screen2. Press the Previous or the Next key to select FORWARD orREVERSE collation.Preparing to build thesetBuilding and printingthe set
