1257.3 Setting up the Copy SpecificationsVariable Length PresetSets the default values for the [Variable Length] displayed on the setup screen when themedia cut mode is specified. The media sizes can be set up within a range of 210 to15,000 mm for each media size.Operation Procedure1 Select [Variable Length Preset] ont h e [ C u s t o m P r e s e ts – C o p yFeatures] screen.2 Select the item to be set up witht h e u s e o f t h e [ ] a n d [ ]buttons, and then press the [Open]button.3 Set the required length with theuse of the [ ] and [ ] buttons,and then press the [Done] button.The entered value will be reflected backon the Variable Length Preset screen.4 Press the [Done] button.The specified values will be saved andthe screen will return to the [CustomPresets – Copy Features] screen.The maximum length that can be printed will differ in accordance with thewidth of the paper and the availability of the optional Print Length ExtensionMemory 512 MB.Refer to "4.8 Cutting Roll Paper" for details on the media cut mode (page 58).Custom Presets – Copy Features DoneSwitch FeatureButtons... Default CopyFeature...R/E Preset... VariableLength Preset.Media Typefot Auto mode.Auto ImageRotate Preset.Other CopyPresets...Program SortPreset...Output OrderPreset...Done1/1 OpenVariable Length PresetsItems Setting1.2.3.4.5.Variable Length (E)Variable Length (D)Variable Length (C)Variable Length (B)Variable Length (A)1188 mm841 mm594 mm420 mm297 mmPrevi-ous NextCancelVariable Length (E) Done+100-100(210 15000)mm1188Press the [+100] and [–100]buttons to increase or decreasethe value in increments of 100.
