278 Chapter 11 Setup Using the Printer Control PanelSetting up the Default Logical PrinterThe following procedure sets up the logical printer that is to be used as the default.Operation Procedure1 Press the < > key with [SETUP FILE]displayed on the parameter selection screen.2 Select [DEF. SETUP FILE] with the < > key,and then press the < > key.3 Press the < > key.4 Select the interface with the use of the < > and< > keys, and then press the key.Press the < > key once it has been set.5 Select the set priority with the use of the < >and < > keys, and then press the key.Press the < > key once it has been set.6 Select the logical printer number with the use ofthe < > and < > keys, and then press the key.The logical printer that has been set up will besaved as the default logical printer.[CENTRO] and [VPI] are optional.The items that can be selected will differbased on the type of interface selected.xSERIAL :[HPGL]xCENTRO :[HPGL]xVPI :[Versatec]Move the cursor to the right and left withthe use of the < > and < > keys.MENUSETUP FILESETUP FILEDEF. SETUP FILEDEF. SETUP FILEI/FI/FSERIAL *FormatHPGL *Printer No.06 *
