Page 6-6 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User GuideFaxDialing MethodsThere are several methods which can be used to enter a fax number or a group of fax number.The following table identifies and explains all the dialing methods available.DIALING METHOD INSTRUCTIONSKeypad Dialingz Use when entering the remote faxnumber using the Numeric Keypad.¾ Load the originals and select the [Fax] key.¾ Use the Numeric Keypad to enter the telephone number of theremote fax machine.¾ Press [Start] to send the fax.Speed Dialingz Use to access a fax number whichhas previously been stored in themachine’s memory.¾ Load the originals and select the [Fax] key.¾ Program the features required for the job.¾ Press [Speed Dial] and enter the Speed Dial number (1-200).The name appears and the original is scanned into memoryready for sending.¾ If the original is loaded on the Document Glass, the displayasks if you want to send another page. Select [Yes] to add moreoriginals, or [No] to begin transmission. Press [Enter].The fax number stored in the speed dial location will be dialedautomatically and the fax is sent.Group Dialingz Use to access a group of numberswhich have previously been stored inthe machine’s memory.¾ Load the originals and select the [Fax] key.¾ Program the features required for the job.¾ Press [Group Dial] and enter the Group Dial number (1-200).¾ When the required number displays, press [Enter].The original is scanned into memory.¾ If the original is loaded on the Document Glass, the displayasks if you want to send another page. Select [Yes] to add moreoriginals, or [No] to begin transmission. Press [Enter].The machine automatically sends the fax to each of thenumbers in the Group.
