Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 1-15WelcomeRegulations - USAFax Send Header RequirementsThe Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use acomputer or other electronic device, including Fax machines, to send any message unlesssuch message clearly contains in a margin at the top or bottom of each transmitted page oron the first page of the transmission, the date and time it is sent and an identification of thebusiness or other entity, or other individual sending the message and the telephone numberof the sending machine or such business, other entity, or individual. (The telephone numberprovided may not be a 900 number or any other number for which charges exceed local orlong-distance transmission charges.)In order to program this information into your Fax machine refer to “Machine Setup” on page2-19 and follow the steps provided.Data Coupler InformationThis equipment complies with Part 68 of the FCC rules and the requirements adopted by theAdministrative Council for Terminal Attachments (ACTA). On the rear of this equipment is alabel that contains, among other information, a product identifier in the formatUS:AAAEQ##TXXXX. If requested, this number must be provided to the Telephone Company.A plug and jack used to connect this equipment to the premises wiring and telephone networkmust comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.A compliant telephone cord and modular plug is provided with this product. It is designed tobe connected to a compatible modular jack that is also compliant.WARNING: Ask your local Telephone Company for the modular jack type installed onyour line. Connecting this machine to an unauthorized jack can damage TelephoneCompany equipment. You, not Xerox, assume all responsibility and/or liability for anydamage caused by the connection of this machine to an unauthorized jack.You may safely connect the machine to the following standard modular jack: USOC RJ-11Cusing the compliant telephone line cord (with modular plugs) provided with the installation kit.See installation instructions for details.
