Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 4-5Paper and Other MediaUsing the Bypass TrayThe Bypass Tray is located on the right side of your machine. It can be closed when not inuse, making the product more compact. Use the Bypass Tray to print transparencies, labels,envelopes or postcards in addition to making quick runs of paper types or sizes that are notcurrently loaded in the paper tray.Acceptable print media is plain paper with sizes ranging from 98 x 148 mm (3.86 x 5.83 inch),to Legal size (216 x 356 mm / 8.5 x 14 inch) and weighing between 60 g/m 2 and 160 g/m 2 (16lb and 43 lb).The following table summarizes the print media allowed and the maximum stacking height foreach paper type.L The height is measured with the stack of sheets laid on a flat surface.7 ¾ To select a paper tray, press the[Paper Supply] key until therequired tray is lit on the StatusMap.Tray 1 and the Bypass Tray areavailable as standard, Tray 2 isoptional.If two tray lights display together,the Auto Tray Switching feature isactive. When one tray runs out ofpaper, the machine will switch tothe other selected tray.EnterPaper SupplyStatus MapPAPER TYPE MAXIMUM STACKING HEIGHTPlain/Bond/Colored and Pre-printed Paper100 sheets or 9 mm (0.35 inch)Envelope 10 envelopes or 9 mm (035 inch)Transparency 30 sheets or 9 mm (0.35 inch)Label 10 sheets or 9 mm (0.35 inch)Cardstock 10 sheets or 9 mm (0.35 inch)
