Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 2-23Getting StartedInstalling SoftwareThere are four drivers provided:- PCL5- PostScript- Twain- ControlCentreThe installation procedure is the same for all of them. You can install all of the drivers at thesame time or as many as you require.)These instructions are for installing direct printing and scanning via the parallel or USB. ForXerox WorkCentre M20i network connections, it is recommended that you contact your SystemAdministrator or refer to the System Administration Guide.The Xerox WorkCentre M20 and M20i can be connected directly to the USB or Parallel Portof a host Workstation. A document file can be sent or received from the host Workstation viathe appropriate port to the Xerox WorkCentre M20 or M20i.Prior to installing the drivers, ensure the USB or Parallel Port connection has been madebetween the Xerox WorkCentre M20 or M20i and the Workstation.)For USB or Parallel Port connection instructions, refer to “Making Connections” starting on page2-12.There are three stages required to installing the machine on a port on a local workstation:¾ Install the driver.This requires the appropriate printer driver to be installed on the workstation.¾ Workstation SetupThis requires the workstation to be configured to print to the WorkCentre M20i.¾ Test Print or ScanA print job should be submitted to ensure the WorkCentre M20i has been installed andconfigured correctly.
