Xerox COPYCENTRE M20I User Manual

Also see for CopyCentre C20: Installation guide User guide User guide Evaluator guide Options guide

Contents

Xerox COPYCENTRE M20I User Manual Manual pdf 12 page image

Page 1-6 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User GuideWelcomeSafetyYour Xerox product and supplies have been designed and tested to meet strict safetyrequirements. These include Safety Agency approval, and compliance to establishedenvironmental standards. Please read the following instructions carefully before operating theproduct and refer to them as needed to ensure the continued safe operation of your product.The safety testing and performance of this product have been verified using XEROX materialsonly.Follow all warnings and instructions marked on, or supplied with the product.This WARNING Mark alerts users to the possibility of personal injury.This WARNING Mark alerts users to heated surfaces.WARNING: This product must be connected to a protective earthing circuit.This product is equipped with a 3-wire type plug, provided with a protective earthing pin. Thisplug will fit only into an earthed power outlet. This is a safety feature. To avoid risk of electricshock, contact your electrician to replace the receptacle if you are unable to insert the pluginto the outlet. Never use an earthed adapter plug to connect the product to a power sourcereceptacle that lacks an earth connection terminal.This product should be operated from the type of power source indicated on the markinglabel. If you are not sure of the type of power available, consult your local power company.Do not allow anything to rest on the power cord. Do not locate the product where persons willstep or trip on the cord.Use of an extension cord with this product is not recommended or authorized. Usersshould check building codes and insurance requirements if a properly earthed extension cordis to be used. Ensure that the total ampere ratings of the products plugged into the extensioncord do not exceed the extension cord ampere rating. Also, ensure that the total amperage ofall products plugged into the wall outlets does not exceed the outlet rating.Disconnect Device for this product is the power cord. To remove all electrical power to theproduct, disconnect the power cord from the power receptacle.Your equipment is equipped with an energy saving device to conserve power when themachine is not in use. The machine may be left on continuously.Unplug this product from the wall outlet before cleaning. Always use materials specificallydesignated for this product. Use of other materials may result in poor performance and couldcreate a hazardous situation.