Page 6-6 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User GuideFaxDialing MethodsThere are several methods which can be used to enter a fax number or a group of fax number.The following table identifies and explains all the dialing methods available.DIALING METHOD INSTRUCTIONSKeypad Dialing" Use when entering the remote faxnumber using the Numeric Keypad.! Load the originals and select the [Fax] key.! Use the Numeric Keypad to enter the telephone number of theremote fax machine.! Press [Start] to send the fax.Speed Dialing" Use to access a fax number whichhas previously been stored in themachine’s memory.! Load the originals and select the [Fax] key.! Program the features required for the job.! Press [Speed Dial] and enter the Speed Dial number (1-200).The name appears and the original is scanned into memoryready for sending.! If the original is loaded on the Document Glass, the displayasks if you want to send another page. Select [Yes] to add moreoriginals, or [No] to begin transmission. Press [Enter].The fax number stored in the speed dial location will be dialedautomatically and the fax is sent.Group Dialing" Use to access a group of numberswhich have previously been stored inthe machine’s memory.! Load the originals and select the [Fax] key.! Program the features required for the job.! Press [Group Dial] and enter the Group Dial number (1-200).! When the required number displays, press [Enter].The original is scanned into memory.! If the original is loaded on the Document Glass, the displayasks if you want to send another page. Select [Yes] to add moreoriginals, or [No] to begin transmission. Press [Enter].The machine automatically sends the fax to each of thenumbers in the Group.
