Page 2-20 Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User GuideGetting Started Machine Setup OptionsOPTION SETTINGS DESCRIPTIONTray 1 Size LTR / A4 / LGL / Folio Use to set the default paper size for Tray 1.Paper Size options are Letter, A4, Legal (216 x356 mm / 8.5 x 14 inch) or Folio.Tray 2 Size LTR / A4 / LGL / Folio Use to set the default paper size for Tray 2.Paper Size options are Letter, A4, Legal (216 x356 mm / 8.5 x 14 inch) or Folio.Bypass Size LTR / A4 / LGL / Folio /A5 / StatementUse to set the default paper size for the Bypasstray. Paper Size options are Letter, A4, Legal(216 x 356 mm / 8.5 x 14 inch), Folio, A5 orStatement.! If feeding media smaller than A4/Letter throughthe bypass tray, the setting can remain set atA4, Letter or Legal size.When copying onto a paper size smaller thanA4/Letter, the printed image may be offset andnot reproduce correctly, even when Auto Fit isselected.Power Save On Use to enable the Power Save feature. If On isselected, set the period of time the machinewaits before Power Save is activated. Choosebetween 5, 10, 15, 30 or 45 minutes.OffTime Out 15 / 30 / 60 / 180SecondsSets the number of seconds the machineremains idle before the current job settings arereset back to the default settings. Use Off todeactivate the option.OffStamp RX Name On Set to On to enable sender information, themachine ID, the page number, the date andtime of reception and the reduction rate of theimage to be printed on each page of eachreceived transmission. The information isprinted on the bottom edge of each page.OffAlarm Sound On Set to On to enable an alarm sound when anerror occurs or a fax communication ends.Off
