Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-9CopyPaper Supply" Use to select thepaper source.StatusMapThe Status Map identifieswhich paper tray isselected, when a papertray is empty and when anerror occurs.! Press [Copy].! To select a paper tray, press the [Paper Supply]key until the required tray is lit on the Status Map.The Status Map identifies which paper tray isselected, when a paper tray is empty and when anerror occurs. The Status Map has a light for eachpaper tray.Each time the [Paper Supply] key is pressed, adifferent tray is selected and a green light displaysto indicate the selected tray. When two tray lightsdisplay together, the Auto Tray Switching featureis active. This enables the machine to switch to adifferent tray if the current tray runs out of paper.If a paper tray is empty, the light will flash and ifenabled, an error tone will sound.Bypass Use to notify the machinethe type of paper loadedin the Bypass Tray.! If the Bypass Tray is selected the Paper Typeoption displays. Use the Navigation Keys toselect the Paper Type being loaded and press[Enter].If using the Bypass, remember to load therequired stock.DocumentFeeder ErrorPaperJamBypassTray 2Tray 1
