Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 3-7CopyClone Use to print multipleimages on a single sheetof paper. The number ofimages produced isdetermined automaticallybased on the originalimage size." Only available using theDocument Glass, ensurethe Document Feeder isempty.! Press [Copy].! Press [Reduce/Enlarge].! Using the Navigation Keys, select [Clone] andpress [Enter].Clone appears on the display.Auto Fit Use to reduce or enlargethe image to fit the papersize automatically." Only available using theDocument Glass, ensurethe Document Feeder isempty.! Press [Copy].! Press [Reduce/Enlarge].! Using the Navigation Keys, select [Auto Fit] andpress [Enter].Auto Fit appears on the display.2 Sided" Use to produce1 or 2 sided copyoutput from 1 or2 sided originals.1-1 Sided Use when originals areprinted on 1 side and 1-sided copies are required.! Press [Copy].! Press [2 Sided].! Use the Navigation Keys to select the optionrequired and press [Enter] to save the selection.! If necessary, use the [Scan Side 2] option to scanside 2. Position side 2 on the Document Glassand select [Yes] then [Enter] to scan side 2.Continue the procedure until all the originals havebeen scanned.! Select [No] when all the originals have beenscanned, and press [Enter].1-2 SidedLongUse when originals areprinted on 1 side only and2 Sided copies, with theconventional "head tohead" layout are required.1-2 SidedShortUse when originals areprinted on 1 side only and2 Sided copies, with the"head to toe" layout arerequired.2-1 SidedLongUse when originals areprinted on both sides, withthe conventional "head tohead" layout, and 1 sidedcopies required.
