Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide Page 11-13TroubleshootingNo. Not Assigned The speed dial locationhas no number assigned.No Paper The recording paper inthe paper tray has runout.Load the recording paper in the paper tray.RX Tray Full Paper is overstacked inthe output bin.Remove paper.Paper Jam 0 Paper has jammed in thepaper feeding area.Clear the jam. Refer to “Paper Jams” on page11-6.Paper Jam 1 Paper has jammed in thefuser area.Clear the jam. Refer to “Paper Jams” on page11-6.Paper Jam 2 Paper has jammed in thepaper exit area.Clear the jam.Refer to page “Paper Jams” onpage 11-6.Power Failure The machine’s memoryhas not been backed up.Toner Empty The toner cartridge hasrun out. The machinestops.Replace with a new toner cartridge. Refer to“Toner Cartridge” on page 10-5.Toner Low The toner is almostempty.Take out the toner cartridge and gently shake it.By doing this printing operations can betemporarily resumed.Retry Redial? The machine is waiting forthe programmed intervalto automatically redial.Press [Start] to immediately redial, or [Stop] tocancel the redial operation.Function Full The memory has becomefull.Either delete unnecessary documents, orretransmit after more memory becomesavailable. The transmission can also be splitinto more than one operation if it is a large job.DISPLAY MEANING SOLUTION
