3-92 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service ManualError Messages and CodesIIT ErrorApplicable Error Codes• 062-311 / 062-321 / 062-322 / 062-360 / 062-371 / 062-3936 Check the Laser RE Harness Assy forcontinuity.Disconnect P/J40 from the MCUBoard.Disconnect P/J411 from the LaserUnit.Is each cable of J40 <=> J411continuous?Go to step 7. Replace theLaser REHarness Assy.7 Check the Laser Video Harness Assy forcontinuity.Disconnect J41 from the MCU Board.Disconnect J412 from the Laser Unit.Is each cable of J41 <=> J412continuous?Go to step 8. Replace theLaser VideoHarness Assy.8 Check after replacing the Laser Unit.Replace the Laser Unit. (SFP,page 8-86; MFP, page 8-92)Does the error still occur when thepower is turned Off and On?Replace theMCU Board.(SFP,page 8-138;MFP,page 8-160)Complete.Troubleshooting Reference TableApplicable Parts Wiring and Plug/Jack Map References■ IIT Sub Assembly (MFP PL10.1.11)■ IP Board (ESS) (MFP PL8.1.2)■ “Map 8 - MFP LVPS, IP Board, andDrive” on page 10-17■ “Scanner - IIT Sub-Assembly” onpage 10-49Troubleshooting ProcedureStep Actions and Questions Yes No1 Reseat connectors (P/J 1001 and1002) on the IP Board.Does the error still occur when turningthe power Off and On?Go to step 2. Complete.2 Replace the IIT Sub Assembly.(page 8-195)Does the error still occur when turningthe power Off and On?Replace the IPBoard.(page 8-144)Complete.Troubleshooting Procedure (continued)Step Actions and Questions Yes Nohttp://www.manuals4you.com
