5-32 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service ManualPrint-Quality TroubleshootingSkewThe printed image is not parallel with both sides of the paper.Initial Actions• Check the media path.• Ensure there are no debris on the transfer path.• If feeding through the Manual Feed slot, try feeding from Tray 1.The Tray is recommended for paper feeding because paper fed via the ManualFeed slot is prone to skew depending on how the sheet is fed.Troubleshooting Reference TableApplicable Notes Example PrintSeparator Roller, PL2.1.5Feed Roller Assembly, PL3.2.4Registration Roller, PL3.2.9Metal Registration Roller, PL3.2.10Troubleshooting ProcedureStep Actions and Questions Yes No1 Inspect the media being used.Is it approved paper?Go to step 3. Load approvedmedia, then goto step 2.2 Is the image printed correctly? Complete Go to step 3.3 Check media condition.Is the media dry andrecommended?Go to step 5. Replace themedia, then goto step 4.4 Is the image printed correctly? Complete Go to step 5.5 Open and close the Front Cover.Does the Front Cover latch closeproperly?Complete Replace thedefective parts,then go to step6.6 Is the image printed correctly? Complete Go to step 7.Skew 2http://www.manuals4you.com
