5-34 Xerox Internal Use Only Phaser 6500/WorkCentre 6505 Service ManualPrint-Quality TroubleshootingDamaged MediaPaper comes out from the printer wrinkled, folded, or worn-out.Initial Actions• Check the paper transfer path.• Ensure there are no debris on the transfer path.• If feeding through the Manual Feed slot, try feeding from Tray 1.Allow the Fuser to cool before servicing the printer.The Tray is recommended for paper feeding because paper fed via the ManualFeed slot is prone to skew depending on how the sheet is fed.Troubleshooting Reference TableApplicable Notes Example PrintSeparator Roller, PL2.1.5Feed Roller Assembly, PL3.2.4Registration Roller, PL3.2.9Metal Registration Roller, PL3.2.10Troubleshooting ProcedureStep Actions and Questions Yes No1 Check the paper conditionIs the paper dry and approved foruse?Go to step 3. Replace withdry, approvedpaper, then goto step 2.2 Is the image printed correctly? Complete Go to step 3.3 Open and close the Front Cover.Does the Front Cover latch closeproperly?Complete Replace anydefective parts,then go to step4.4 Is the image printed correctly? Complete Go to step 5.5 Reseat the Imaging Unit.Is the image printed correctly?Complete Go to step 6.Damaged Print Mediahttp://www.manuals4you.com
