Operator Guide 1- 17OverviewFigure 1-11 Printer with inverter feeder/stacker + feeder/stacker +bypass transportFigure 1-12 Printer with inverter feeder/stacker + feeder/stacker +feeder/stacker + bypass transportThe illustrations above show a printer with two feeder/stackermodules and a bypass transport, and a printer with three feeder/stacker modules and a bypass transport. With the bypasstransport installed, the printer can support up to three feeder/stacker modules, including the inverter feeder/stacker.Paper stockssupported onbypass transportThe bypass transport accepts all paper stocks on which the printercan print, and it accommodates simplex and duplex printing.DFA support The bypass transport meets the Xerox Document Feeding andFinishing Architecture (DFA) specifications. The system softwaresupports DFA. However, in order for the bypass transport tofunction correctly, you need to set up finishing personality profilesto identify your finishing device to the printing system. (Thecustomer support representative for your finishing device can giveyou the information you need to create a personality profile foryour third-party finishing device.)Support and interface with feedersFor information on marketing partners that provide solutions forsupport and interface with feeders, contact your local Xerox salesrepresentative.
