Getting StartedXerox ® VersaLink ® C7000 Color Printer 33User GuideInstallation and SetupFor reference:Installation Guide packaged with your printer.Online Support Assistant at www.xerox.com/office/VLC7000supportInstallation and Setup OverviewBefore you print, ensure that your computer and the printer are plugged in, powered on, and connected.Configure the initial settings of the printer, then install the print driver software and utilities on yourcomputer.You can connect to your printer directly from your computer using USB, or connect to a network using anEthernet cable or wireless connection. Hardware and cabling requirements vary for the differentconnection methods. Routers, network hubs and switches, modems, Ethernet cables, and USB cables arenot included with your printer and are purchased separately. Xerox recommends an Ethernet connectionbecause it is typically faster than a USB connection, and it provides access to the Embedded Web Server.For more information, refer to the System Administrator Guide at www.xerox.com/office/VLC7000docs.Selecting a Location for the Printer1. Select a dust-free area with temperatures from 10–32°C (50–90°F), and relative humidity 10–85%.Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room cancause condensation inside the printer, directly interfering with image transfer.2. Place the printer on a level, solid, non-vibrating surface with adequate strength to hold the weightof the printer. The printer must be horizontal with all four feet in solid contact with the surface.To find the weight for your printer configuration, refer to Weights and Dimension on page 179.Select a location with adequate clearance to access supplies and to provide proper ventilation.To find the clearance requirements for your printer, refer to Total Space Requirements.3. After positioning the printer, connect it to the power source and computer or network.
