165Scan to PC (FTP/SMB)OverviewThis feature is designed to convert scanned data to TIFF, JPEG, or PDF format, and then use the FTP orSMB protocol to send the data to a computer (server or workstation) on the network.Notes:It is assumed that you purchased the Scanning option to enable Scanning to FTP/SMB with yourDevice. If you did not, contact your Xerox Representative to purchase this option.For scanning to SMB, make sure that a shared folder is created for saving scanned data on thenetwork.For scanning to FTP, make sure that the server is running the FTP service and that you have createda directory within the FTP root to be used as a scan filing location.Requirements for FTPWhen using FTP transmission, one of the following FTP servers, with an account on that server (loginname and password), is required.• Microsoft Windows Server 2003FTP service of Microsoft Internet Information Server 6.0• Microsoft Windows NT Server 4.0, Microsoft Windows 2000 Server, Microsoft Windows NTWorkstation 4.0, Microsoft Windows 2000 Professional, or Microsoft Windows XPFTP service of Microsoft Internet Information Server 3.0 or later• Mac OS XFTP service of Mac OS X 10.1.5/10.2.x/10.3.8/10.3.9/10.4.2• Novell NetWareFTP service of NetWare 5.11 or 5.12Refer to the manual provided with the software for how to configure the FTP service.Requirements for SMBWhen using SMB transmission, a computer running one of the following Operating Systems, whichincludes a shared folder, is required.• Microsoft Windows 98• Microsoft Windows Me• Microsoft Windows NT 4.0• Microsoft Windows 2000• Microsoft Windows Server 2003• Microsoft Windows XP
