218Configuring Scan File certificates with CentreWare Internet ServicesTo configure certificates with CentreWare Internet Services, first enable HTTP communications (as statedunder Configuration of HTTP Communication Encryption in this section). Next, import a certificatefrom a Certificate Authority (in PKCS12 format). Finally, set the certificate as a scan file certificate.1. Start a web browser.2. Enter the machine's IP address, beginning with "https," into the Address box of your web browser,and press the Enter key.Example:https://192.168.1.1/3. Click the Properties tab.4. Click [+] on the left of PKI Settings (Public Key) to display the items in the folder.5. Click Certificate Management. Note: To see this hot link, at least one certificate must have beencreated and stored on the machine. To create a self-signed certificate, if necessary, follow theinstructions for Configuration of HTTP Communication Encryption.6. Import a certificate.Important • When importing a certificate, if the same certificate has been already registered in [LocalDevice] or [Others], the certificate cannot be imported. Delete the existing certificate before importingthe new one.a. Enter the Password.b. Enter the Re-enter Password.c. Enter a file name for the file you want to import, or select the file to be imported by clicking theBrowse button.d. Click the Import button. When a screen to enter the user name and password appears, enter theSystem Administrator user ID and password into User Name and Password, and then click OK.Note: The default user ID is "11111" and the default password is "x-admin".7. Refresh the web browser.8. Click [+] on the left of PKI Settings (Public Key) to display the items in the folder.
