191Configuring Templates with Internet ServicesYou need to create at least one template for users to select to scan their documents to the pre-configuredrepository. This template is often referred to as the Default Template. The template can be created witheither Internet Services or SMARTsend software running on a remote template pool server. To createand configure this template with Internet Services, perform the following steps.1. At your workstation, open your Web browser and enter the IP address of the machine in the Addressor Location field. Press Enter.2. Click the Print/Scan tab, then the Job Templates hot link.3. Click the Display Job Templates Screen button.4. Select the Template radio button.5. Click Create New.6. Enter the administrator User Name and Password and click OK.7. Enter a Template Name in the box supplied.8. Type in a Description.9. Select either Public or Private for Repository Type. Note that the Public selection uses therepository set up under File Repository Setup. Private uses the private server set up here.10. Select a Filing Policy from the drop-down menu.11. From the Job Log drop-down menu, select whether or not to Enable the Job Log. The Job Logworks with the Document Management Field feature, described below, and is filed with the scan job.12. Place a checkmark in the Confirmation Sheet check box to enable that feature. The ConfirmationSheet shows whether the scan was successful or failed, and includes other data that can be usefulfor troubleshooting.13. Click Next.14. Use the displayed General Settings, Added Features, Image Quality and DMF (DocumentManagement Field) tabbed dialogs to set the parameters for your scanning template.Document Management Field (DMF)This tab enables you to add data fields to the template. The information is filed with your scanneddocument in the Job Log. The Job Log can then be accessed by third party software and the DMFinformation retrieved and associated with the scanned file.a. Click the DMF tab.b. Click Add.c. Refer to the displayed descriptions to set your parameters as desired.d. Click Apply when done.15. Click OK.16. To view your Template, click List.
