YASKAWA VIPA IM 053EC Manual

Also see for VIPA IM 053EC: Manual

CAUTION!Bus interface and power module may not be separated!Here you may only exchange the electronic module!In the System SLIO there is the possibility to place up to 64 modules in on line. By meansof the line extension you can divide this line into several lines. Here you have to place aline extension master at each end of a line and the subsequent line has to start with a lineextension slave. Master and slave are to be connected via a special connecting cable. Inthis way, you can divide a line on up to 5 lines. To use the line extension no special con-figuration is required.Each periphery module consists of a terminal and an electronic module.1 Terminal module2 Electronic moduleThe terminal module serves to carry the electronic module, contains the backplane buswith power supply for the electronic, the DC 24V power section supply and the staircase-shaped terminal for wiring. Additionally the terminal module has a locking system forfixing at a mounting rail. By means of this locking system your SLIO system may beassembled outside of your switchgear cabinet to be later mounted there as whole system.Line extensionPeriphery modulesTerminal moduleVIPA System SLIOBasics and mountingSystem conception > ComponentsHB300 | IM | 053-1EC00 | en | 16-4910