Yaesu FT dx 1200 Operating Manual

Also see for FT DX 1200: Operation manual Operating manual Operating manual

Page 40FT D X 1200 O PERA T ING M ANUALconvenience featuresScopeCENTER mode1. Switch operation mode to “CENTER mode”.See “Switching between CENTER/FIX Modes”below for details on changing operating modes.2. Press the [SCOPE] button momentarily to displaythe scope screen. The current frequency is displayed in the center. Width of scope display can be set in the Menuitem “128 CENTER SPAN FREQ”.FIX mode1. Switch the operation mode to “FIX mode”.See “Switching between CENTER/FIX Modes”below for details on changing operating modes.2. Press the [SCOPE] button momentarily to displaythe scope. The frequency set in Menu Mode is displayed atthe leftmost start point on the screen. Width of scope display can be set in Menu Modeby individual band (See below).Frequency M enu Mode1.8MHz 130 FIX 1.8MHz SPAN3.5MHz 132 FIX 3.5MHz SPAN5MHz 134 FIX 5.0MHz SPAN7MHz 136 FIX 7.0MHz SPAN10MHz 138 FIX 10MHz SPAN14MHz 140 FIX 14MHz SPAN18MHz 142 FIX 18MHz SPAN21MHz 144 FIX 21MHz SPAN24MHz 146 FIX 24MHz SPAN28MHz 148 FIX 28MHz SPAN50MHz 150 FIX 50MHz SPANReceiving FrequencyFrequency set in Menu ModeSending FrequencyExample of display in split operationSCOPESwitching Between CENTER/FIX Modes[SELECT] button[MENU] button1. Pre ss the [MENU] button to enter the Menumode.2. Rotate the [VFO-B/CLAR] knob (or press the/ button) to select Menu item “124 SCOPEMODE”.3. Press the [SELECT] button, then rotate the[VFO-B/CLAR] knob (or press the / but-ton) to select the “CENTER” or “FIX” (Factorydefault is “CENTER”).4. Press the [SELECT] button, then press the[MENU] button to save the new setting and exitto normal operation.[VFO-B/CLAR] knob[CLEAR] button[/] buttonSCOPECurrent Frequency