Yaesu FTDX9000D Operation Manual

Also see for FTDX-9000D: Operation manual Brochure & specs Update guide Update guide Update guide

Contents

Page 132 FTDX9000D OPERATION MANUALMENU M ODEDISPLAY G ROUP013. TFT COLORFunction: Selects the TFT color.Available Values: COOL BLUE/CONTRAST BLUE/FLASH WHITE/CONTRAST UMBER/UMBERDefault Setting: COOL BLUE014. DIMMER-METERFunction: Setting of the meter brightness level when“DIM” is selected.Available Values: 0 ~ 15Default Setting: 4015. DIMMER-VFDFunction: Setting of the frequency and TFT displaybrightness level when “DIM” is selected.Available Values: 0 ~ 15Default Setting: 8016. BAR DISPLAY SELECTFunction: Selects one of three parameters to beviewed on the Tuning Offset Indicator.Available Values: CLAR/CW TUNE/VRF-μTUNEDefault Setting:CW TUNECLAR: Displays relative clarifier offset.CW TUNE: Displays relative tuning offset betweenthe incoming signal and transmittedfrequency.VRF-μTUNE: Displays the peak position of the VRFor μTUNE filter.017. ROTATOR START UPFunction: Selects the starting point of your controller’sindicator needle.Available Values: 0/90/180/270ºDefault Setting: 0º018. ROTATOR OFFSET ADJFunction: Adjusts the indicator needle precisely tothe starting point set in menu selection 123.Available Values: –30 - 0Default Setting: 0019. RIGHT TX METERFunction: Selects the Sub meter functionAvailable Values: ALC/VDDDefault Setting: ALCALC: Indicates incoming signal strength on the subband (VFO-B) while receiving, and indicatesthe ALC (Automatic Level Control) operatingrange while transmitting.VDD: Indicates the Vdd (final amplifier drain voltage)at all times.020. EXT DISPLAYFunction: This menu shold always be set to “ON.”Available Values: ENABLE/DISABLEDefault Setting: DISABLE