Yaesu FTDX9000D Operation Manual

Also see for FTDX-9000D: Operation manual Brochure & specs Update guide Update guide Update guide

Contents

Page 97FTDX9000D OPERATION MANUALSPLIT -F REQUENCY OPERATIONCONVENIENT T RANSMITTER ACCESSORIESQuick Split OperationThe Quick Split feature allows you to set a one-touch offset of +5 kHz to be applied to your radio’s transmit frequencyon the Sub VFO, compared to the Main (VFO-A) frequency.1. Press the MNU switch to enter the Menu mode.2. Rotate the Main Tuning Dial to select Menu itemGENERAL 032 QUICK SPLIT FREQ.3. Rotate the CLAR/VFO-B knob to select the de-sired offset.The available selections are-20kHz ~ 0kHz ~ +20kHz (factory default: +5 kHz).4. When you have completed all adjustments, pressand hold in the MNU switch for two seconds tosave the new setting and exit to normal operation.If you only press the MNU key momentarily toexit, any changes you performed will not be stored.1. Start with regular transceiver operation on the Main(VFO-A) band.MAIN(VFO-A)RX switch “ON” (LED glows Green)TX switch “ON” (LED glows Red)SUB(VFO-B)RX switch “OFF” (LED Off)TX switch “OFF” (LED Off)2. Press and hold in the SPLIT switch for two sec-onds to engage the Quick SPlit feature, and apply afrequency 5 kHz above the Main (VFO-A) fre-quency to the Sub (VFO-B) frequency register.Press and hold in the SPLIT switch for two sec-onds to increment the Main (VFO-A) frequency to+5 kHz.The VFO configuration will then be:MAIN(VFO-A)RX switch “ON” (LED glows Green)TX switch “OFF” (LED Off)SUB(VFO-B)RX switch “OFF” (LED Off)TX switch “ON” (LED glows Red)Quick Point The operating mode applied to the Sub (VFO-B)register will be the same as that in use on the Main(VFO-A) register. The offset of the Sub VFO from the Main VFO isprogrammed via the Menu, and is set to +5 kHz atthe factory. Other offsets may be selected, however,using the following procedure:MAIN(VFO-A)RX switch “ON”(LED glows Green)MAIN(VFO-A)TX switch “OFF”(LED Off) SUB(VFO-B)RX switch “OFF”(LED Off)SUB(VFO-B)TX switch “ON”(LED glows Red)SPLIT switchCLAR/VFO-B knobMNU keyMAIN Tuning Dial