Yaesu FTDX9000D Operation Manual

Also see for FTDX-9000D: Operation manual Brochure & specs Update guide Update guide Update guide

Contents

Page 58 FTDX9000D OPERATION MANUALANTENNA SELECTIONFour main antenna jacks, available for both transmission and reception, are provided on the rear panel of the transceiver.What's more, a receive-only jack is provided, and the incoming signal path may also have a special after-market filter orpreamplifier inserted, if desired, with one-touch access.ANTENNA SELECT switchSelection of the desired TX/RX antenna is accomplishedby pressing the appropriate 1 ~ 4 Antenna Selectionswitch (# ) on the front panel.To engage the RX-only antenna, press the RX switchwithin the Antenna Selection switch group (# ) on thefront panel. The RX-only antenna must be connected tothe corresponding “RX ANT” antenna jack on the rearpanel.The antenna currently selected for use on the Main (VFO-A) band will be designated by a Red LED.The antenna currently selected for use on the Sub (VFO-Bband will be designated by an Orange LED.If both the Main and Sub bands are utilizing the same an-tenna, both the Red and Orange LEDs will light up on thesame antenna location.ANTENNA SWITCH(VFO-A)ANT “1”ANT “3”ANT “2”ANT “4”RX ANTRX OUT(MAIN)RX OUT(SUB)ANTENNA SWITCH(VFO-B) RX ANTENNA SWITCH(VFO-B)RX ANTENNA SWITCH(VFO-A)TX/RX RELAYTransmitterSectionMAIN (VFO-A)ReceiverSUB (VFO-B)ReceiverBPFCONVENIENT F EATURES