Yaesu FTM-10SR Operating Manual

37FTM-10SR O PERATING M ANUALMEMORY O PERATIONMEMORY C HANNEL N UMBER C HANGEYou may change the memory channel number to a desired vacant memory channel manu-ally.1. Recall the memory channel on which you wish to change the Memory Channel number.2. Press and hold the key to enter the Memory Channel Customization mode.3. Rotate the DIAL knob to select Menu Item “M2 MEM CH”.4. Press the key briefly. The current memory channel num-ber will appear in the display.5. Press and hold the key for one second.6. Rotate the DIAL knob to select the desired memory chan-nel number.If you decide to cancel the Memory Channel NumberChange, press the [VOL/SEL] key.If the channel number is blinking, that channel is currently“occupied” by other frequency data, and you should notselect that channel.7. Press and hold the key to change the Memory Channel Number.8. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.MEMORY C HANNEL S ORTYou may sort and renumber the Memory Channels by frequency, from low to high:1. Press the front panel key to switch to the Memory Recall mode, if needed.2. Press and hold the key for one second to enter to the Memory Channel Customizationmode.3. Rotate the DIAL knob to select Menu Item “M3 MEMSORT”.4. Press the key briefly, to display the confirmation mes-sage (“SORT Y”) on the LCD.If you decide to cancel the Memory Channel Sort, press the[VOL/SEL] key.5. Press and hold the key for one second to display themessage (“SORTING”) on the LCD, then the FTM-10SR isreset automatically and sorting is complete.