41FTM-10SR O PERATING M ANUALDCS CODEThe FTM-10SR enables you to change the DCS Tone Code.1. Recall the memory channel on which you wish to change the DCS code.2. Press and hold the key for one second to enter the Memory Channel Customizationmode.3. Rotate the DIAL knob to select Menu Item “M9 SQL DCS”.4. Press the key to display the current DCS Code.5. Rotate the DIAL knob to select desired DCS Tone Code.6. Press the [VOL/SEL] key to save the new setting and re-turn to the memory recall mode.MEMORY O PERATION023025026031032036043047051053054065071072073074114115116122125131132134143145152155156162165172174205212223225226243244245246251252255261263265266271274306311315325331332343346351356364365371411412413423431432445446452454455462464465466503506516523526532546565606612624627631632654662664703712723731732734743754-DCS CODECTCSS/DCS O PERATIONThe FTM-10SR enables you to change the CTCSS/DCS operation (CTCSS/DCS mode,CTCSS Tone frequency, and DCS Tone Code) that was set previously.1. Recall the memory channel on which you wish to change the CTCSS/DCS operation.2. Press and hold the key for one second to enter the Memory Channel Customizationmode.3. Rotate the DIAL knob to select Menu Item “M10 SQLTYPE”.4. Press the key to display the current CTCSS/DCS op-eration mode.5. Rotate the DIAL knob to select desired CTCSS/DCS operation mode.TONE ENC: Activates the CTCSS EncoderTONE SQL: Activates the CTCSS Encoder/DecoderREV TONE: Activates the Reverse CTCSS Decoder (Mutes receiver when matching toneis received)DCS: Activates the Digital Coded Encoder/DecoderOFF: Disable the CTCSS/DCS operation6. Press the [VOL/SEL] key to save the new setting and return to the memory recall mode.