Yaesu FTM-10SR Operating Manual

93FTM-10SR O PERATING M ANUALMENU (“SET ”) M ODESet Mode Item [F3 AF PITCHF3 AF PITCHF3 AF PITCHF3 AF PITCHF3 AF PITCH]Function: Select the Tone Pitch control for the received audio.Available Values: LOW-3/LOW-2/LOW-1/NORMAL/HIGH-1/HIGH-2Default: NORMALSet Mode Item [F4 AF PRESTF4 AF PRESTF4 AF PRESTF4 AF PRESTF4 AF PREST]Function: Enable/Disable the Volume Setting Alert feature.Available Values: OFF/OV ALERT/LV ALERT/ HV ALERTDefault: OFFOV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knobblinks orange when volume level is set to the ±3 steps of the preset level.LV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knobblinks orange when volume level is set to the preset level minus 3 steps.HV ALERT: Activates the Volume Setting Alert feature. A lamp at the left of the DIAL knobblinks orange when volume level is set to the preset level plus 3 steps above.OFF: Disables the Volume Setting Alert feature.Set Mode Item [F5 AF-VFOF5 AF-VFOF5 AF-VFOF5 AF-VFOF5 AF-VFO]Function: Select the DIAL knob and display function.Available Values: TOGGLE/AUTOBACKDefault: AUTOBACKTOGGLE: Keeps the DIAL knob function and display until the [VOL/SEL] key is pressedonce again.AUTOBACK: The DIAL knob function and display comes back to frequency selection andfrequency display after approximately 3 seconds.Set Mode Item [F6 BEEPF6 BEEPF6 BEEPF6 BEEPF6 BEEP]Function: Enables/Disables the beeper.Available Values: KEY+SC/KEY/OFFDefault: KEY+SCKEY+SC: The beeper sounds when you press any key, or when the scanner stops.KEY: The beeper sounds when you press any key.OFF: Beeper is disabled.Set Mode Item [F7 BLU SAVEF7 BLU SAVEF7 BLU SAVEF7 BLU SAVEF7 BLU SAVE]Function: Enable/Disable the battery saver of the optional BH-1 Bluetooth ® Headset.Available Values: OFF/ONDefault: OFF