61FTM-10SR O PERATING M ANUALBluetooth® OPERATIONTo activate Bluetooth ®:1. Press and hold the [VOL/SEL] key for one second to activate the Menu Mode.2. Rotate the DIAL knob to select Menu Item “F8 BLU VOX”.3. Press the key to enable selection of this Menu item.4. Rotate the DIAL knob to select the desired Bluetooth ®function:OFF: Disable the Bluetooth ® function.PTT: Activate Bluetooth ® function without the VOX feature.VOX HIGH:Activate Bluetooth ® function with the VOX feature (VOX gain: High).VOX LOW: Activate Bluetooth ® function with the VOX feature (VOX gain: Low).5. Press the [VOL/SEL] key to save the new setting and exit to normal operation.Effective Communications RangeThe communications range between the BH-1 and the FTM-10SE is around 10m (33 ft).Obstacles between the BH-1 and the FTM-10SR may shorten the communications distance.If you move out of range, the beeper sounds a low pitch tone. If you move back intorange, the beeper sounds a high pitch tone.About the Bluetooth ® Battery IndicatorWhen the BH-1’s battery voltage becomes low, the BH-1’s indicator will blink red/blueand blue alternately, the beeper will sound a low pitch tone,and a “LOW BATT” icon will appear in the display. When theBH-1 battery voltage becomes low, recharge the battery as soonas possible in the CAB-1 Bluetooth® Head Set Charger Sleeve.Note: The BH-1 is automatically turned off when it is inserted into the CAB-1 charger.If the BH-1 is inserted correctly, the LED indicator will glow Red. A fully dischargedbattery will be charged completely in 3 hours. When charging is finished, the LED indica-tor will glow blue.The BH-1’s approximate battery life is as follows:Operating Band Battery Life (Approx.)AM/FM Broadcast, 3 hoursExternal Audio InputAmateur Band Battery Saver ON: 10 hours1:1:8 (TX:RX:Standby) Battery Saver OFF: 3 hoursBattery SaverIf there has been no signal or key activity for 20 seconds, the Battery Save automaticallyputs the BH-1 to “sleep”, to conserve battery life.When a signal is received or the PTT key is pressed the BH-1 will be active again.You may enable the BH-1 battery saver feature via Menu Item “F7 BLU SAVE” (See page93).