Operation36 Turn the throttle grip from the fully closedto the fully open position. Make sure that itturns smoothly and that it completely re-turns to the fully closed position. Look for loose or damaged connections ofthe throttle and shift cables.F4B, F5A, F6C Move the tiller handle fully to the left andright to check that operation is smooth. Turn the throttle grip from the fully closedposition to the fully open position. Checkthat the throttle grip turns smoothly andthat it completely returns to the fully closedposition. Check the throttle cable and throttle link forloose or damaged connections. Check the shift link and start-in-gear pro-tection cable for loose or damaged con-nections.EMU36484Engine shut-off cord (lanyard)Inspect the engine shut-off cord and clip fordamage, such as cuts, breaks, and wear.EMU42861Engine oilF2.5A1. Put the outboard motor in an upright po-sition (not tilted).2. Remove the top cowling.3. Check the oil level using the oil levelcheck window to be sure the level fallsbetween the upper and lower marks. Fillwith oil if it is below the lower mark, ordrain to the specified level if it is abovethe upper mark.ZMU06851ZMU068521. Clip2. Engine shut-off cord (lanyard)ZMU06874ZMU0687312
