3-22EUPDN701034*UPDN4030654020764110422) Push the power trim/tilt switch “UP”until the outboard has tilted up com-pletely.3) Push the tilt support knob into theclamp bracket to support the engine.wAfter tilting the engine, be sure to sup-port it with the tilt support knob. Other-wise, the engine could fall back downsuddenly if oil in the power trim/tilt unitshould lose pressure.EMU01151PROCEDURE FOR TILTING DOWNHydro-tilt model1) Release the tilt-lock lever.2) Hold the rear of the top cowling withone hand, tilt the engine up slightlyand pull out the tilt support knob.3) Slowly tilt the engine down.4) Place the tilt-lock lever back into thelock position.EMU01328PROCEDURE FOR TILTING DOWNPower trim/tilt model1) Push the power trim/tilt switch “UP”until the engine is supported by thetilt rod.2) Pull out the tilt support knob.3) Push the power trim/tilt switch “DN”(Down) to lower the engine to thedesired position.
