4-6E6) Remove the motor from the watertank.7) Install the silencer cover and topcowling.1 Water surface2 Lowest water level605024qw903021*q605014EMU003428 Flushing with the Flushing AttachmentcCAvoid running the outboard at highspeed while on the flushing attachment,or overheating could occur.1) Remove the top cowling and the pro-peller.2) Install a flushing attachment 1 to thecooling water inlet.3) Run the engine at a fast idle for 10~15minutes supplying fresh water.4) Just prior to turning off the engine,quickly spray “Yamaha Stor-RiteEngine Fogging Oil” (Part No. LUB-STRRT-12-00) alternately into thesilencer cover. When properly done,the engine will smoke excessivelyand almost stall.5) Remove the flushing attachment andwipe off any excess water.6) Install the top cowling and the pro-peller.NOTE:A flushing attachment is available from aYamaha dealer.
