4-7EEMU00349Lubrication1) Remove the spark plug(s). Spray aYamaha “Stor-Rite Engine FoggingOil” into each cylinder for 10 seconds.Grease the spark plug threads andreinstall the spark plug(s) and torqueto proper specification. (Refer to the“CLEANING AND ADJUSTINGSPARK PLUG”).2) Turn the engine over with the stoplanyard disconnected to work the fog-ging oil into the piston rings.3) Change the gear-case oil. (Refer to“CHANGING GEAR OIL”). Inspect theoil for the presence of water whichindicates a leaky seal. Seal replace-ment should be performed by anauthorized Yamaha dealership priorto use.4) Grease all grease fittings. (Refer tothe “GREASING”)EMU00351Cleaning and Anti-corrosion Measure1) Wash down the exterior of the out-board with fresh water and dry offcompletely.2) Spray the engine’s exterior with“Yamaha Silicone Protectant” (PartNo. LUB-SILCNE-13-00).3) Wax the cowling with a non-abrasivewax such as “Yamaha Silicone Wax”(Part No. ACC-11000-15-02).
