4-25E5) With the outboard motor in an verti-cal position, using a flexible or pres-surized filling device, inject the gearoil into the oil drain plug hole.6) When the oil begins to flow out of theoil level plug hole, insert and tightenthe oil level plug.7) Insert and tighten the oil drain plug.EMU01037INSPECTING AND REPLACINGANODE(S)Yamaha outboard motor is protectedfrom corrosion by a sacrificial anode(s).Check the anode(s) periodically. Removethe scales from surfaces of the anode(s).For the inspection and replacement of theanode(s), consult a Yamaha dealer.cCDo not paint the anode(s), for this wouldrender it ineffective.NOTE:Remove the cover with anode afterremoving the bolts 1 when checking theanode condition.601015604016000704224013qGear oil grade/capacity:Refer to SPECIFICATIONS on page 4-1.
