4-18E4) Remove the oil filler cap 2. Add thecorrect amount of oil through thefiller hole.Reinstall the filler cap.5) Start the engine and watch to makesure the low oil pressure warninglamp turns off. Make sure that thereare no oil leaks.cCIf the oil lamp does not turn off, or ifthere are oil leaks, stop the engine andfind the cause. Continued operation witha problem could cause severe enginedamage. If the problem cannot be foundand corrected, consult your Yamaha deal-er.Engine oil grade/capacity:Refer to “SPECIFICATIONS”, page 4-1.203033wNOTE:If a torque wrench is not available whenyou are installing the drain plug, fingertighten the bolt just until the gasketcomes into contact with the surface of thedrain hole. Then tighten 1/4 - 1/2 turn.Have the drain plug torqued to the correctvalue with a torque wrench as soon aspossible.
