POWR Power unit5-49 62Y3A11Installing the rocker arm assembly1. Check that the camshaft dowel pin holea is in the position shown in the illustra-tion. Adjust if necessary.2. Assembly the rocker arm 1 and rockerarm shaft 2, and the tensioner 3, rockerarm retainer 4, stopper guide 5 byinstalling the bolts.NOTE:Make sure that the arrow marks b on the twotensioners and stopper guides are facing up.3. Install the rocker arm shaft assembly tothe cylinder head by installing the bolts,and then tighten them to the specifiedtorque.Installing the cylinder head1. Install the oil pump 1 by aligning the oilpump drive shaft a with the camshaft pinb.S62Y5650aBolt: 18 N·m (1.8 kgf·m, 13 ft·lb)S62Y5665R
