LOWR Lower unit6-53 62Y3A11Removing the propeller shafthousing assembly1. Straighten the claw washer tabs a, andthen remove the ring nut and clawwasher.2. Pull out the propeller shaft housingassembly.È For USA and CanadaÉ For worldwideDisassembling the propeller shafthousing1. Remove the reverse gear and thrustwasher.È For USA and CanadaÉ For worldwideGland nut wrench 1: YB-34447Ring nut wrench 3 1: 90890-06511Ring nut wrench extension 2:90890-06513Bearing housing puller 3: YB-06207Universal puller 4: YB-06117Bearing housing puller claw L 5:90890-06502Stopper guide plate 6: 90890-06501Center bolt 7: 90890-06504Slide hammer and adapters 1: YB-06096Bearing separator 2: 90890-06534Stopper guide plate 3: 90890-06501Stopper guide stand 4: 90890-06538Bearing puller 5: 90890-06535Bearing puller claw 1 6: 90890-06536
