BRKT Bracket unit7-53 62Y3A11Removing the power trim andtilt/hydro tilt1. Fully tilt the outboard up, and then sup-port it with the tilt stop lever 1.WARNINGAfter tilting up the outboard, be sure tosupport it with the tilt stop lever.Otherwise, the outboard could suddenlylower if the power trim and tilt unit shouldlose fluid pressure.2. Loosen the plastic locking tie 2, andthen pull out the PTT motor lead 3.3. Remove the tilt pin 4.4. Remove the circlip(s) 5 and the shaft 6.5. Loosen the bolt 7, and then remove theshaft 8.6. Remove the power trim and tilt/hydro tilt9.NOTE:To remove the power trim and tilt/hydro tilt,lower the tilt rod slightly.
