62Y3A11 6-6412345678IÈ For USA and CanadaÉ For worldwideNOTE:• Install the needle bearing with the manufac-ture identification mark a facing upward.• When using the driver rod, do not strike thespecial tool in a manner that will force thestopper b out of place.2. Install the sleeve, original shim(s), anddrive shaft bearing outer race.È For USA and CanadaÉ For worldwideCAUTION:Add or remove shims, if necessary, whenreplacing the pinion or lower case.NOTE:• Apply the gear oil to the inside and outsideof the sleeve.• Install the sleeve by facing the projection dforward.Driver handle 1: YB-06071Drive shaft needle bearing remover andinstaller 2: YB-06155Drive shaft needle bearing depth stop 3:YB-34473Driver rod SL 4: 90890-06602Needle bearing attachment 5:90890-06611Bearing depth plate 6: 90890-06603Depth c: 186.4–188.6 mm (7.34–7.43 in)Crank upper and lower seal installer 7:YB-06244Bearing outer race attachment 7:90890-06626Driver handle 8: YB-06071Driver rod LL 8: 90890-06605Drive shaft and lower case (T50/FT50B, FT50C)
