62Y3A11 7-7612345678I8. Check the bushing 1 for damage orwear. Replace if necessary.Assembling the power trim and tiltmotor1. Install the oil seal 1 and the bushing 2into the motor base 3 as shown.2. Attach the circuit breaker 4 onto brush 15 together with the brush holder 6 andconnect the wire lead 7.3. Install the springs 8 into the motor base,then the brush holder into the motor basetogether with the brushes and circuitbreaker.4. Install the armature 9, O-ring 0, andyoke A.Installing the power trim and tilt1. Fully tilt the outboard up, and then sup-port it with the tilt stop lever 1.WARNINGAfter tilting up the outboard, be sure tosupport it with the tilt stop lever.Otherwise, the outboard could suddenlylower if the power trim and tilt unit shouldlose fluid pressure.Power trim and tilt motor
