POWR Power unit5-65 62Y3A115. Install the piston with the “UP” mark onthe piston crown facing towards the fly-wheel.È For USA and CanadaÉ For worldwideNOTE:Apply engine oil to side of the piston assem-bly.6. Install half of the bearings 9 into the cyl-inder body 0.NOTE:Insert the projection f of the bearing into thenotch in the cylinder body.7. Set the crankshaft A, and oil seals Band C into the cylinder body as shown.Apply engine oil to the inner oil seal, jour-nal bearings, and connecting rod bear-ing.8. Install the connecting rod cap 8 to theconnecting rod, and then tighten the con-necting rod bolts D to the specifiedtorques in two stages. Apply engine oil tothe connecting rod cap and connectingrod bolt.Piston ring compressor: YU-33294Piston slider: 90890-06529S62Y5A8109S62Y5A808DEE
