2-5E701035EMU01155Throttle Friction Adjusting ScrewA friction device in the remote control boxprovides adjustable resistance to move-ment of the remote control lever, and canbe set according to operator preference.An adjusting screw is located on the frontof the remote control box.wDo not overtighten the friction adjustingscrew. If there is too much resistance, itmay be difficult to move the lever, whichcould result in an accident.Resistance ScrewIncrease Turn clockwiseDecrease Turn counterclockwiseUPDN701034UPDNEMU01331Power Trim/Tilt SwitchThe power trim/tilt adjusts the motorangle in relation to the transom. Thepower trim/tilt switch is located on theremote control lever grip. Pushing theswitch “UP” trims the motor up, then tiltsthe motor up. Pressing the switch “DN”tilts the motor down and trims the motordown. When the switch button isreleased, the motor will stop in its currentposition.NOTE:Refer to the sections “ADJUSTING TRIMANGLE” and “TILTING UP/DOWN” inChapter 3 for instructions on usage.
