Yamaha VZ150Z Owner's Manual

Also see for VZ150B: Owner's manual

Contents

3-12EEMU00248PROCEDURE FOR REMOTECONTROL MODEL4) Place the remote control lever in theNeutral position.NOTE:The start-in-gear protection device per-mits the engine to be started only when itis in Neutral.5) Attach the engine stop switch lanyardto a secure place on your clothing, oryour arm or leg. Then, install the lockplate on the other end of the lanyardin the engine stop switch.w8 Attach the engine stop switch lanyardto a secure place on your clothing, yourarm or leg while operating.8 Do not attach the lanyard to clothingthat could tear loose. Do not route thelanyard where it could become entan-gled, preventing it from functioning.8 Avoid accidentally pulling the lanyardduring normal operation. Loss ofengine power means the loss of moststeering control. Also, without enginepower, the boat could slow rapidly.This could cause people and objects inthe boat to be thrown forward.6) Turn the main switch to “ON”.NOTE:In case of dual-engine operation, whenthe main switch is turned on, the buzzeroperates for a few seconds and stopsautomatically. Should either of the dualengines stall, the buzzer operates.701025N701015