3-4EEMU01494BREAKING IN (RUNNING IN)ENGINEYour new engine requires a period ofbreak-in (running-in) to allow mating sur-faces of moving parts to wear-in evenly.Correct break-in (running-in) will helpensure proper performance and longerengine life.cC8 Failure to follow the break-in (running-in) procedure may result in reducedengine life or even severe engine dam-age.8 Do not use pre-mixed fuel in thisengine as it may cause carbon depositson the fuel injector thereby causingengine trouble.8 Follow the instructions for breaking-in/running-in carefully.NOTE:The label pictured at left is to be left onthe top cowling until the break-in (run-ning-in) procedure has been completedand may be removed afterwards.Break-in (running-in) time:10 hoursEMU01195Run the engine under load (in gear with apropeller installed) as follows.1) First 10 minutes:Run the engine at the lowest possi-ble-speed. A fast idle in neutral isbest.000106Do not use fuel mixedwith oil during break-inor under any circum-stances.
